You are here: Webhelp 5.5R7 > Network > Port Mirroring

Port Mirroring

Some low-end platforms do not support port mirroring.

The device is designed with port mirroring on Ethernet interfaces. This function allows users to mirror the traffic of one interface to another interface (analytic interface) for analysis and monitoring.

To configure port mirroring, take the following steps:

  1. Enable port mirroring on an Ethernet interface, and select the traffic type to be mirrored.

  2. Configure a destination interface.

To configure the destination interface of port mirroring:

  1. Select Network > Port Mirroring.
  2. Select an interfaces from the Destination Interface drop-down list, and click OK. All the source and destination interface will be listed in the table below.