You are here: Webhelp > Policy > Global Blacklist

Global Blacklist

After adding the IP addresses or services to the global blacklist, system will perform the block action to the IP address and service until the block duration ends. You can manually add IP addresses or services to the blacklist and system can also automatically add the IP addresses or services to the blacklist after you configure the IPS module.

Configuring global blacklist includes IP block settings and service block settings, and both IPv4 and IPv6 address are supported.

Configuring IP Block Settings

To configure the IP block settings, take the following steps:

  1. Select Policy > Global Blacklist > IP Block.
  2. Click New. The Block IP Configuration page will appear.
  1. Click OK to save the settings.

Configuring Service Block Settings

To configure the service block settings, take the following steps:

  1. Select Policy > Global Blacklist > Service Block.
  2. Click New. The Block Service Configuration page will appear.
  3. Click OK to save the settings

Blacklist Global Configuration

To log the blacklist, take the following steps:

  1. Select Policy > Global Blacklist > Configuration.
  2. Click the Enable button, and system will log the hit blacklist traffic. If not, the log will not be logged.
  3. Click OK to save the settings.