You can configure the SNMP server to get the ARP information through the SNMP protocol.
Creating an SNMP Server
To create an SNMP server, take the following steps:
- Select System > SNMP server.
- Click New.In the SNMP Server Configuration dialog box, configure these values
Option Description Server IP Type the SNMP server IP address into the Server IP box. Port Type the port number for the SNMP server into the Port box. The value range is 1 to 65535, the default value is 161. Community Type the community for the SNMP server into the Community box. This option is only effective if the SNMP version is V1 or V2C. Virtual Router Select the VRouter from the drop-down list. Source Interface Select the source interface from the drop-down list for receiving ARP information on the SNMP server. Interval Time Type the the interval into the Interval Time box for receiving ARP information on the SNMP server. The value range is 5 to 1800 seconds, the default value is 60 seconds.
- Click OK.